Recreation Advocate

The OutdoorWire family websites feature news and information affecting outdoor recreation opportunities and access to public lands. 

By accepting you will be accessing a service provided by a third-party external to http://www.4x4wire.com/
Font size: + –
Subscribe to this blog post Unsubscribe
Print

Looking out the rear view mirror

Jeep Tech Pages
18510 Hits

b2ap3_thumbnail_yj-mirror.jpgThe Jeep is 1994 vintage and does show signs of many a mile.  While '94 is young for a Jeep, there are many things that do wear.  One such item has become an annoyance and needed attention - rear view mirrors.  The stock Jeep mirrors are on swivel ball joints.  Over time, these have loosened to the point they do not stay in position.

To put it in perspective, the windshield rear view mirror is next to useless once an over sized tire on a bumper-mounted rack is in place.  That leaves the door mounted side rear view mirrors as the sole point to see what is beside and behind.  Once they no longer stay in position, rear view is a problem. An OEM replacement part was easily located, ordered, and quickly delivered.
 
A quick inspection of the delivered parts showed a design change from the stock.  While the stock mirror was on a swivel ball mount connected to the mounting bracket, the new design features a multi-position detent to connect the mirror to the bracket.
 
The mirror housing contains the mirror that does move to adjust to fit necessary driver needs.  The detent positioning allows for the mirrors to be pulled in if necessary while keeping the fine driver specific adjustment in tact. The new design is a marked improvement over the original design.
Installation is a simple matter of removing three screws and the old mirror.  The new mirror fits in place with three new screws provided.
 
Installation time was about 15 minutes total for both mirrors.  Time included unpacking the new mirrors, finding the correct Thorax wrench, removing the old mirrors, and installing the new mirrors.

Location (Map)

Tags:
jeep cj5 cj7 Cherokee YJ TJ JK Mirrors 4x4 Jeep YJ
Inyo NF Forest Plan Workshops
Steering - bump steer after a lift

About the author

John Stewart

John Stewart

Advocating access to public lands carries a responsibility to be part of the solution for managing the public lands.  As a strong proponent for participation to make a difference, I am a full time advocate for recreation and the Managing Editor of the OutdoorWire family websites. 

4x4Wire.com is dedicated to four wheel drive recreation featuring technical articles and information to promote, protect, and provide outdoor recreation opportunities.  4x4Voice.com focuses on California issues. MUIRNet.net is focused on environmental, administrative and legislative news and information. OutdoorWire.com is Access and Landuse Central with an overall index to the contents of the family of websites. 

Author's recent posts
More posts from author

Related Posts

 

4x4Wire News-Bytes

4x4Voice News

MUIRNet News

Trending on Outdoorwire

4x4Wire.com

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting. Copyright (c) 1999-2020 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission. You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material. All corporate trademarks are the property of their respective owners.

4x4Wire Site Map

Site Map

4x4Wire Archives